R&D: Combinatorial Dependence of Magnetic Printing Characteristics in Double Magnet Master Media for Energy-Assisted Magnetic Recording

AIP Advances has published an article written by Takashi Komine, Graduate School of Science and Engineering, Ibaraki University, 4-12-1, Nakanarusawa, Hitachi, Ibaraki 316-8511, Japan.

Abstract: “In this study, the combinatorial dependence in double magnet master for energy-assisted magnetic recording was investigated by the micromagnetic framework. Four kinds of master media, which are soft single magnet (SSM), hard single magnet (HSM), soft double magnet (SDM) and hard double magnet (HDM), were compared. Comparing single magnet and double magnet master media, more adequate combination of double magnet master media was discussed. The HSM, SDM, and HDM master media can write line/space (L/S) pattern with bit length of 20nm, while the double magnet master media can clearly print L/S patterns comparing with single magnet in case of 10nm. For higher coercivity EAMR media, the larger printing field causes larger recording field difference by utilizing SDM master media while in case of HDM the recording field difference is almost constant even if the printing field increases. As a result, since the recording field difference of SDM becomes larger than that of HDM as the printing field strengthens, thus, SDM master media can write the servo signals onto higher coercivity EAMR media. It was concluded that it is important for the low coercivity parts of double magnet master media to have a larger saturation magnetization due to enhancement of large recording field difference.“