What are you looking for ?

Silicon Power UD80 PCIe 3.0 NVMe 1.4 Up to 2TB M.2 SSD With 3D NAND Flash

Up to 3,400MB/s and 3,000MB/s RW speeds and supporting SLC caching to improve sequential and random R/W performance

Silicon Power Computer & Communications Inc. (SP) releases its PCIe 3.0 SSD, the UD80, featuring storage capacities up to 2TB with 3D NAND flash technology.

Silicon Power Ud80 Feature 03

PCIe Gen3x4 for all
The UD80 strikes an harmony between cost and performance to breathe new life into your system without burning a hole in your pocket. Designed for creators that need more than just a jolt of inspiration, it provides value and a performance boost with a PCIe Gen3x4 interface – a boost that leaves SATA III SSDs behind in the dust.

Create faster with reduced waiting times
It utilizes the speed capabilities of PCIe 3.0 with the efficiency of NVMe and Host Memory Buffer (HMB) technology. Let your creative juices flow with rapid read and write speeds up to 3,400MB/s and 3,000MB/s, respectively. At the same time, experience productivity via the higher performance and lower latency that’s achieved by NVMe 1.4 and HMB technology.

Silicon Power Ud80 Feature 2


  • PCIe Gen 3×4 interface with read speeds up to 3,400MB/s and write speeds up to 3,000MB/s

  • Supports NVMe 1.4 and Host Memory Buffer (HMB) for higher performance and lower latency

  • 3D NAND technology allows for storage in a compact design

  • Available in storage capacity options up to 2TB

  • Supports low density parity check (LDPC) coding to ensure accuracy of data transmission and reliability of data access

  • Supports SLC caching to improve sequential and random read/write performance

  • Supports RAID to protect data in the case of a drive failure

  • Built-in E2E data protection for enhanced data transfer integrity

  • Form factor M.2 2280 (80mm) allows for installation in laptops, small form factor PC systems, and some ultrabooks

Silicon Power M80 2203


  • Capacity: 250, 500GB, 1TB, 2TB

  • Dimensions: 22x 80×3.5mm

  • Weight: 8g

  • Performance read (max.): up to 3,400MB/s (*)

  • Performance write (max.): up to 3,000MB/s (*)

  • Interface: PCIe Gen 3×4

  • Shock resistance: 1500g/0.5ms

  • MTBF: 1,500,000 hours

  • Operating temperature: 0°C – 70°C

  • Certification: CE, FCC, UKCA, BSMI, Green dot, WEEE, RoHS, KC

  • Warranty: 5-year limited

  • System requirements: Computer with M.2 slots supporting PCIe interface and one of the following operating systems: Windows 8.1 or Windows 10

(*) Performance read/write varies by system performance (such as hardware, software, and interface mode) and capacity

Read also :