Qnap QXP-10G2U3A USB 3.2 Gen 2 Dual-Port PCIe Expansion Card for NAS and PC

Qnap Systems, Inc. launched the QXP-10G2U3A USB 3.2 Gen 2 dual-port PCIe expansion card which provides speeds of up to 10Gb/s

This cards can be installed in the firm’s NAS with a PCIe slot, or Windows/Linux desktops/servers to enable faster connections to modern USB devices.

The QXP-10G2U3A includes 2xUSB 3.2 Gen 2 Type-A ports, with each port providing up to /s transfer speeds. It supports the USB Attached SCSI Protocol (UASP) to facilitate fast file-sharing data transfers, uses low-power processes, and follows standard PCIe/USB bus power management to optimize power consumption. It also supports overcurrent detection and short circuit protection.

“The QXP-10G2U3A expansion card enables transfer speeds up to twice as fast as USB 3.2 Gen 1 and up to 20x faster than USB 2.0. This enhanced speed opens up new opportunities for NAS and PC users, including the ability to use a Qnap USB JBOD for easy storage expansion and high-speed backup,” said Jason Hsu, product manager.

JBOD Manager utility
Click to enlarge

No driver is required to install the card to connect to the TL-D800C and TL-R1200C-RP firm’s USB JBOD product series. QTS / QuTS hero NAS users can manage connected USB JBOD storage using Storage and Snapshots Manager; PC users via the company’s JBOD Manager.

The QXP-10G2U3A USB 3.2 Gen 2 expansion card is available.

Read also:
Qnap QXG-2G1T-I225 Single-Port 2.5GbE PCIe Card for NAS and PC ($67)
For Windows/Linux PC, also supports Windows Server 2019 and provides server management with support for Intel Teaming (Link aggregation), PXE, Intel AMT, Wake on LAN, and VLAN.
August 21, 2020 | Press Release
Qnap Dual-Port 16Gb/32Gb FC Expansion Cards
Support QuTS hero NAS for FC SAN solutions.
June 24, 2020 | Press Release