What are you looking for ?
Mobile Search Icon
Mobile Menu Icon
Infinidat
Articles_top

Silicon Power P34A60 PCIe Gen3×4 NVMe Up to 2TB SSD

Up to 2,200MB/s and 1,600MB/s RW speeds, low-density parity check ECC, end-to-end data protection, and RAID for data integrity and stability

This is a Press Release edited by StorageNewsletter.com on October 22, 2019 at 2:18 pm

Silicon Power Computer & Communications Inc. (SP) launches P34A60PCIe Gen3×4 NVMe SSD storage solution that doesn’t skimp on performance.

Silicon Power P34a60 Spec

It’s designed for novice users, DIY system builders, purpose-built system manufacturers, and those who are looking to upgrade their PC. But with a PCIe Gen3x4 interface, read speeds up to 2,200MB/s, and write speeds up to 1,600MB/s, this SSD is anything but basic.

Optimum performance from NVMe 1.3 and HMB
The P34A60 supports NVMe 1.3, which demands better performance vectors than AHCI (Advanced Host Controller Interface), including scalable bandwidth, increased IO/s, and low latency. In addition, HMB (Host Memory Buffer) architecture, which allows the host driver to allocate system memory (RAM) for use by the SSD, results in efficiency. It’s this teamwork that provides performance.

Silicon Power P34a60

Your data in good hands
The P34A60 is engineered with LDPC (Low-Density Parity Check) coding, a ECC algorithm, to keep data secure. Furthermore, End-To-End (E2E) data protection, to ensure that accessed and retrieved data are correct from start to finish, and a RAID engine, which provides an acceptable level of fault tolerance, work to enhance data integrity for greater reliability and stability.

Features:

  • PCIe Gen 3×4 interface with read speeds up to 2,200MB/s and write speeds up to 1,600MB/s

  • Storage capacity options up to 2TB

  • LDPC (Low-Density Parity Check) ECC technology, End-To-End (E2E) data protection, and RAID engine for enhanced data integrity and stability

  • Supports NVMe 1.3, Host Memory Buffer (HMB), and SLC Cache to deliver performance

  • Small form factor M.2 2280 (80mm) allows for installation in laptops, small form factor PC systems, and some ultrabooks

Specs

  • Capacity: 256, 512GB, one, 2TB

  • Dimensions: 22.0×80.0x3.5mm

  • Weight: 8g

  • Read: up to 2,200MB/s

  • Write: up to 1,600MB/s

  • Interface: PCIe Gen3X4

  • Shock resistance: 1,500G/0.5ms

  • MTBF: 2,000,000 hours

  • Operating temperature: 0°C – 70°C

  • Certification: CE, FCC, BSMI, Green dot, WEEE, RoHS, KCC

  • Warranty: 5 years

  • System requirements: Computer with M.2 slots supporting PCIe interface and one of the following OSs: Windows 8.1 or Windows 10

 

Articles_bottom
AIC
ATTO
OPEN-E