What are you looking for ?
Mobile Search Icon
Mobile Menu Icon
Infinidat
Articles_top

DeepSpar Data Recovery Launches USB Stabilizer

$1,390, allowing Windows software to quickly and reliably work with unstable/degraded USB storage devices

This is a Press Release edited by StorageNewsletter.com on March 15, 2019 at 2:28 pm

DeepSpar Data Recovery Inc. announces the release of the USB Stabilizer, which allows any Windows software to quickly and reliably work with unstable/degraded USB storage devices.

Deepspar Usb Stabilizer 2

It is a combination of software and a hardware device which connects between the PC and USB source drive. The source drive shows up in Windows as if it was connected directly, allowing any software to work with it, including PC-3000, R-Studio, DFL, UFS Explorer, MRT, FTK, etc.

Key features:

  • Works with any non-proprietary USB storage, including devices converted to USB through an adapter. With basic adapters it can be used with almost any type of storage device, including SATA drives and the AHCI/NVMe PCIe SSDs.

  • Ensures that Windows always maintains a stable connection to the source drive, even if it’s physically degraded and intermittently goes offline.

  • Customizable read timeout duration in milliseconds.

  • Read timeout enforced by software reset, hardware reset, controller reset, or drive repower.

  • Works with vendor specific commands, so third party tools like PC-3000, DFL, and MRT can build head maps and repair firmware issues through the USB Stabilizer. In some cases the added stability even allows USB firmware repair procedures to be successful when they would otherwise fail due to Windows dropping the drive in the middle of the repair.

  • Optionally stops Windows from mounting the drive’s file system or even reading the MBR, giving access to drives with a bad sector at LBA0.

  • Hardware write blocking.

  • Free firmware/software updates.


USB Stabilizer Demo video

Articles_bottom
AIC
ATTO
OPEN-E