Addonics Brings Out High-Speed Duplicators for Cloning

Addonics
Technologies Inc. announced a family
of high speed duplicators that make multiple copies of mSATA
SSDs, 2.5-inch SATA HDD/SSDs or micro SATA drives from a single
master drive.

Each duplicator comes bundled with a
set of 2.5-inch mSATA flash drive kits that turn a mSATA SSD into a
2.5-inch SATA SSD. Depending on model, you can mix and match the
mSATA SSD and 2.5-inch SATA HDD, or the mSATA SSD and micro SATA
drive in the duplicator, which makes it a tool for transferring the
content between the mSATA card and 2.5-inch HDD or the mSATA card and
micro SATA drive.

These stand-alone duplicators offer an
advantage because they do not tie up computer resources. They are
also OS independent with a maximum copying speed of 90MB/s
depending on the media. To start copying, open the drive bays, load
the master media into the source bay, and load equal or larger
capacity target media into the target bay. The result is a
sector-by-sector duplicate including the master boot record. The
cloned drive works like the original.

Models include:

• 1:5 Combo mSATA SSD HDD Duplicator
  (MSHDUS5);

• 1:5 mSATA / micro SATA SSD Duplicator
  (MSDU5);

• 1:9 Combo mSATA SSD HDD Duplicator
  (MSHDUS9HS);

• 1:11 mSATA / micro SATA SSD Duplicator
  (MSDU11).

The duplicators allow to copy 5, 9
or 11 drives at one time (depending on the model) from mSATA SSD,
2.5-inch SATA HDD, or a smicro SATA HDD/SSD. Drives are added or
removed without tools.

By using optional micro SATA-CF or
CFast adapters with the 1:5 and 1:11 models, the duplicators can also
be used as a CF or CFast card duplicator.

The MSRP starts at $849 for the 1:5
model to $1,499 for the 1:11 mSATA / micro SATA SSD duplicator.