What are you looking for ?
Infinidat
Articles_top

Tyan Exhibits NVMe-Based Server and Storage Platforms

For enterprise, cloud and data center

Tyan, subsidiary of MiTAC Computing Technology Corporation, exhibited its latest NVMe optimized server and storage platforms at IDF 2016 at the Moscone Center, San Francisco, CA.

GT62B-B5539

Tyan_GT62B-B5539Featuring high IO/s and storage density, the company delivers performance with support for up to 4x NVMe in 1U GT62B-B5539, 1U GT62B-B7076 and 2U TN70B-B7086 storage platforms for enterprise, data center and cloud environment deployments. The 4U-quad-socket Xeon processor E7-8800/4800 v3/v4-based FT76-B7922, targeting HPC market, was also displayed at IDF 2016.

“In order to address data intensive workloads in need of higher performance for storage, Tyan takes full advantage of Intel NVMe technology to highlight hybrid storage configurations. Tyan server solutions with NVMe support can not only boost storage performance over the PCIe interface but provide storage flexibility for customers through scale-out architecture” said Danny Hsu, VP, Tyan business unit, MiTAC Computing Technology.

TN70B-B7086

Tyan_TN70B-B7086The GT62B-B5539 server platform features Xeon processor D-1500, a low-power server SoC architecture, up to 16 cores, and 10×2.5″ hot-swap drive bays with support for four NVMe drives.

The platform is designed to deliver the balance of performance and power consumption for the storage market.

Additionally, the company showcases Xeon processor E5-2600 v3/v4-based storage platforms for the SMB, enterprise and private cloud segment – the TN70B-B7086 provides a cost-effective storage expansion with support for 6xstandard PCIe x8 slots and 12×3.5″/2.5″ hot-swap drive bays with four of the bays supporting NVMe drives. The GT62B-B7076 supports 10×2.5″ hot-swap drive bays with four of the bays supporting NVMe drives. Both TN70B-B7086 and GT62B-B7076 are equipped with OCP and storage mezzanine slots, which allows customers benefit from the maximum I/O flexibility.

  • GT62B-B5539: 1U single-socket Xeon processor D-1500 (SoC) based platform supports up to 4xDDR4-2400 DIMM slots, and 10xSFF, hot-swap 12Gb SAS 12Gb/s devices. Four of the SFF bays can support NVMe devices in premium configuration.

  • TN70B-B7086: 2U dual-socket Xeon processor E5-2600 v3/v4-based platform supports up to 16xDDR4-2400 DIMM slots, and 12xLFF/SFF, hot-swap SAS devices. Four of the LFF bays can support NVMe devices in premium configuration. There are additional 2x SFF internal drive seats for boot device installation.

  • GT62B-B7076: 1U dual-socket Xeon processor E5-2600 v3/v4-based platform supports up to 16xDDR4-2400 DIMM slots, and 10xSFF, hot-swap 12Gb SAS devices. Four of the SFF bays can support NVMe devices in premium configuration.

  • FT76-B7922: 4U quad-socket Xeon processor E7-8800/4800 v3/v4-based platform with support for up to four Xeon Phi coprocessor modules, 96xDDR4 DIMM slots, and up to 8xSFF, hot-swap 12Gb SAS devices.

  • S5539: Single-socket Xeon processor D-1500-based server board in micro ATX (9.6″x9.6″) form factor for 1U or pedestal low-power storage server deployment.

  • S5542: Single-socket Xeon processor E3-1200 v5-based server board in ATX (12″x9.6″) form factor for entry server deployment.

  • S7086: Dual-socket Xeon processor E5-2600 v3/v4-based server board in rack-optimized, EATX (12″x13″) form factor for 2U full-featured server deployment.

Articles_bottom
AIC
ATTO
OPEN-E