Raidon GR2660-B3 Enclosure Accommodates Two 2.5-Inch HDDs or SSDs
RAID mode and USB 3.0
This is a Press Release edited by StorageNewsletter.com on July 25, 2014 at 2:55 pmThrough the USB 3.0 transmission interface, the GR2660-B3 from RAIDON Technology, Inc. accommodates two 2.5″ HDDs or SSDs.
With the built-in RAID mode switch, you can switch between RAID-1 (mirroring), RAID-0 (striping) or JBOD configurations, giving both security and fast transmission.
GR2660-B3 screw-free HDD installation, requires no fuss and no tools. Choose RAID mode, format the disk, and you’re ready to go.
Over 60% faster than the first generation, internal structure of GR2660-B3 comprises a 6Gb SATA chipset and transforms to a USB 3.0. That means you’ll get transmission speeds over 60% faster than the previous generation R2420.
GR2660-B3 has three configuration modes built-in: RAID-1 (Safe Mode), RAID-0 (Speed Mode), and JBOD (two independent volumes) to choose according to needs with speed picture as below chart.
Take data with you
In case of your files are too big for internet transmission, but you need to use the same files in different occasions with different equipment, such as, the size of your image or video library may number to terabytes. Then, HDD swap design is most suitable for your requirement. GR2660-B3 under JBOD mode, each disk is independently data bank, you can swap to the image library by your choice. Also, use other RAIDON modules to fulfill your needs in different environments (disk swapping is only possible under JBOD mode.)