 |
Themes & Channels
→ Calendar
→ Top Storage
Trends in 2012
→ Most Promising
Storage Start-Ups
→ 91 SSD Makers
in the World
→ All 57 M&As
in 2011
→ All 55 Financial
Funding Rounds
in 2011
→ All Firms in de-dupe
→ Top 10 WW
Storage Firms
in 2010
→ Storage
Abbreviations
→ What Do
Represent
All These Bytes?
→ Editor's Message
to PRs
From Apro, BON Series of Ruggedized SATA II 2.5-Inch SSDs
This is a Press Release edited by StorageNewsletter.com on Wed, March 17th, 2010
Up to 512GB with MLC, 256GB with SLC
APRO, a Taiwanese manufacturer of industrial-grade NAND Flash storage devices, has launched the BON Series of Serial ATA II (SATA II) Solid State Drives (SSDs) in a ruggedised 2.5 inch form factor.
The BON Series includes the highest capacity SATA II SLC (single level cell) NAND Flash SSD available today at 256 GBytes and also the highest capacity SATA II MLC (multi-level cell) NAND Flash SSD at 512 GBytes.
In addition, the BON Series SATA II SLC SSDs are also available in data capacities of 32 GBytes, 64 GBytes and 128 GBytes. All the drives are packaged in 2.5 inch form factor, ruggedised metal casings measuring 9.5mm high for all the drives except the 256 GByte drive which measures 15.3mm high.
Ideally suited to embedded industrial, transportation, military and aerospace applications, the BON Series SATA II SSDs support Fast Erase of media data either by hardware trigger or by software ATA vendor code command across the entire range. Drives also supporting hardware and software triggered Secure Erase, particularly useful for military applications, will be available later in 2010.
The internal dual control RAID-0 design of the BON Series SATA II SSDs helps deliver their high performance, providing a maximum sequential read capability of 240 MBytes/sec with an average access time of 0.1ms and a maximum sequential write capability of 190 MBytes/sec. The BON Series SATA II SSDs are fully compliant with both the SATA 1.0a and 2.6 specifications supporting the required data throughput rates of 1.5 Gbits/sec and 3 Gbits/sec. The drives weigh just 115g.
The BON Series SATA II SSDs provide an extended operational temperature range of -40ºC to +85ºC, vibration, shock and humidity compliance to MIL-STD-810F environmental specifications and are capable of operating up to an altitude of 70,000 feet. In addition, they provide a mean time between failure (MTBF) in excess of 3 million hours, endurance performance greater than 2 million cycles with data retention of 10 years or more.
“The BON Series SATA II SSDs are ideally suited to the growing number of high capacity, high performance data storage applications emerging in the European industrial, mil/aerospace and transportation markets,” said Erez Lev, Managing Director of ProSaleTech Ltd., APRO’s channel management partner in Europe. “They not only satisfy the capacity and performance requirements that these applications increasingly demand but deliver them in a compact, lightweight and extremely rugged package.”
The BON Series includes the highest capacity SATA II SLC (single level cell) NAND Flash SSD available today at 256 GBytes and also the highest capacity SATA II MLC (multi-level cell) NAND Flash SSD at 512 GBytes.
In addition, the BON Series SATA II SLC SSDs are also available in data capacities of 32 GBytes, 64 GBytes and 128 GBytes. All the drives are packaged in 2.5 inch form factor, ruggedised metal casings measuring 9.5mm high for all the drives except the 256 GByte drive which measures 15.3mm high.
Ideally suited to embedded industrial, transportation, military and aerospace applications, the BON Series SATA II SSDs support Fast Erase of media data either by hardware trigger or by software ATA vendor code command across the entire range. Drives also supporting hardware and software triggered Secure Erase, particularly useful for military applications, will be available later in 2010.
The internal dual control RAID-0 design of the BON Series SATA II SSDs helps deliver their high performance, providing a maximum sequential read capability of 240 MBytes/sec with an average access time of 0.1ms and a maximum sequential write capability of 190 MBytes/sec. The BON Series SATA II SSDs are fully compliant with both the SATA 1.0a and 2.6 specifications supporting the required data throughput rates of 1.5 Gbits/sec and 3 Gbits/sec. The drives weigh just 115g.
The BON Series SATA II SSDs provide an extended operational temperature range of -40ºC to +85ºC, vibration, shock and humidity compliance to MIL-STD-810F environmental specifications and are capable of operating up to an altitude of 70,000 feet. In addition, they provide a mean time between failure (MTBF) in excess of 3 million hours, endurance performance greater than 2 million cycles with data retention of 10 years or more.
“The BON Series SATA II SSDs are ideally suited to the growing number of high capacity, high performance data storage applications emerging in the European industrial, mil/aerospace and transportation markets,” said Erez Lev, Managing Director of ProSaleTech Ltd., APRO’s channel management partner in Europe. “They not only satisfy the capacity and performance requirements that these applications increasingly demand but deliver them in a compact, lightweight and extremely rugged package.”
Print this newsWith all the daily news
on the WW storage industry, this
website is updated every day at 9AM
in Chicago or 4PM in Paris.
You can subscribe to receive
an email with the daily headlines.
